This is a Linear Multi-Code 109950 Single-Channel, 12–24-VAC/DC Receiver.
This receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Remote Whip Antenna (106603) can also be used with this receiver.
This receiver is a dual-frequency receiver. An internal jumper selects either 300-MHz or 310-MHz operating frequency. The 300-MHz frequency is compatible with standard Multi-Code transmitters, while the 310-MHz frequency is compatible with the Stanley Multi-Code transmitters.
The operator supplies 12–24 VAC/DC to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally-open relay output can switch up to 1 A @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio-activation terminals.
The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator.
Compatible with Multi-Code and Stanley transmitters only.
Operates on 12–24 VAC/DC
3-foot antenna coax and bulkhead connector
Codes: 1,024 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (selectable with jumper)
Dimensions: 3.625″ W x 5.25″ H x 1.5″ D